Air Brake Adjusting Kit for HGV 2pc
Used to adjust the automatic slack adjusters found on many HGV brake systems. The kit contains a fork shaped tool to release the brake tensioner button while the double square reversible ratchet ring spanner is used to adjust the brake adjuster clearance.
#N/A
Assorted Fuel and Pipe Connector Kit including Insertion Tool
A master fuel pipe and connector kit, developed to allow the replacement or repair of the most common sizes of hard plastic fuel pipe and connectors found on modern vehicles. The kit enables the technician to produce an effective, professional repair that is in keeping with the OEM product. The kit contains male pipe connectors and female quick connectors in straight and angled formats as well as lengths of the relevant plastic pipe. Lengths of specially selected rubber fuel hose, pipe cutter and connectors plus twin ear clips are also included. This master kit also includes Laser Tools unique pipe connector insertion tool (Part No. 6933) secured in EVA foam in the base of the box, to ease the fitting of the hard plastic fuel pipe to the connectors. All contents from this kit are available separately.
DVSA approved Bowmonk portable brake decelerometer for recording overall braking efficiency and the percentage of braking imbalance of the service and parking brake on all classes of motor vehicle. The Bowmonk BrakeCheck is a fully self-contained, portable, battery-powered brake meter that can be used by workshops, government traffic authorities, testing and inspection stations, to test and report on vehicle brake efficiency.
Connect Assorted Automotive Electric Supaseal Connector Kit 424pc
Assorted automotive electrical supaseal connectors kit with 424 components. Supaseal connectors are to be used on applications where a waterproof joint/ seal are required for electrical cabling. To be used on 0.5mm squared to 1.5mm squared cable. Ideal assortment for any automotive electrical engineer working on sensor or harness repairs.
Connect Extra Thin Cutting Discs 115mm x 1.0mm 10pc
Connect thin metal cutting discs provide premium cutting performance. With reinforced centre boss and low vibration performance, these discs product less edge burring after cutting and minimal heat discolouration. Suitable for use on stainless steel, sheet metal, mild & high-grade steel. Discs are manufactured to European safety standards and marked with EN12413.
Cooling System Pressure Tester for HGV
High quality cooling system pressure tester with a comprehensive set of adaptor caps for HGVs.
DPF Removal/Installation Tool for Scania
Designed to allow the easy removal and fitment of the DPF (Diesel Particulate Filter) found on SCANIA 5 and 6 Cylinder Engines.
An easy-flow pump for use with 20L oil drums and suitable for use with engine oil, gear oil, and transmission fluid (ATF). It features a D-shaped handle, for easy down stroke, 50” PVS hose with an internal wire spring to help reduce kinking, and a curved aluminium spout.
A 220V electro-hydraulic electric vehicle (EV) battery lifting table, featuring a large working platform with tilting function, is fitted with 6 independently adjustable insulated rubber lifting pads making it ideal for use during the fitment or removal of EV battery packs that don’t have a flat bottom e.g. Volkswagen e-Golf. It also features; a double scissor design, a hand-held lifting controller, a 1.2 tonne lifting capacity and a lifting range of 650mm to 1840mm.
EV Recovery Operators Safety Kit in Storage Bag
An EV safety and tools kit, supplied in a Laser EV tools storage bag, specifically created for roadside recovery operators, to ensure safety of the operator, and minimise high voltage risk.
EV Technicians Pro Tool Kit in Storage Bag
An EV safety and tools kit, supplied in a Laser EV tools storage bag, containing all of the essential requirements for EV emergency service/repair work, along with selected high voltage test instruments, to allow for basic diagnostic testing.
An EV safety equipment and tools kit, supplied in a Laser EV tools storage bag, containing all of the essential requirements for emergency EV service/repair work.
Designed to screw directly on to the AdBlue® tank filler neck where the tank is fitted with a vertically accessed filler (e.g. under boot floors or under-bonnet areas etc.). The funnel valve allows the user to stop the filling process even when there is fluid still in the funnel to help avoid over filling the tank.
The g-meter+ is designed for carrying out statutory annual MOT brake performance testing. It is DVSA-approved by the GEA, including for data transfer with the MOT Testing Scheme (MTS). In addition to use for cars and vans, it is suitable for brake performance testing on HGVs. It is also TÜV Rheinland certified as a brake-measuring instrument.
HGV Exhaust Brake Adjustment Gauges for Volvo and Mack
A 14-piece HGV exhaust brake adjustment gauge, also known as "Jake Brake" gauges, used to adjust the engine braking system cam clearance as required by OEM.
HGV Wheel Nut Cap Remover Pliers
Heavy duty wheel nut cap remover pliers. Adjustable to 2 sizes for HGV wheel nut (lug nut) covers.
Take the guesswork out of vehicle maintenance with our specialized Infrared Thermometer, designed to provide quick and accurate temperature readings of your vehicle’s brake components. This thermometer ensures that your brakes are operating at optimal temperatures for performance and safety.
Insulated Extra Long Slim Star Bit Socket 3/8inch D T10 to T40 7pc
A 7-piece set of fully insulated slimline long reach, 3/8” drive, Star* socket bits, suitable for use on restricted access TORX* fixings as found on EV batteries etc. Manufactured to IEC60900 standards, for safe operator use on live circuits up to 1000v AC and 1500v DC, making them ideal for use by electricians, auto electricians or mechanics working on hybrid and electric vehicles or areas where access is restricted. The extra slim overall shaft diameter allows for access between close fitting components where standard electricians long series bit sockets cannot reach.
A set of 3 insulated pliers manufactured to IEC60900 standards, for safe operator use on live circuits up to 1000v AC and 1500v DC, from chrome vanadium with a satin finish and insulated handles with slip guards. Suitable for use by technicians and mechanics working on hybrid and electric vehicles, together with professional electricians and installers. Supplied in an EVA foam tray, designed to fit roll cab drawers, keeping the pliers clean, tidy and ready for use.
Insulating Safety Bag 210 x 130mm
Insulating PVC bag, ideal for use with EV & PHEV cable ends and connectors when disconnecting, to avoid accidental contact between components carrying different voltage.
Insulating Safety Bag 305 x 225mm
Insulating PVC bag, ideal for use with EV & PHEV cable ends and connectors when disconnecting, to avoid accidental contact between components carrying different voltage.
Laser Tools Air Duster Blow Gun - for HGV
Air duster blow gun supplied with hose swivel coupler and T-connector. Designed for use in HGV cabs.
Laser Tools Barrel Pump - Rotary
This robust tool pumps oil and diesel using 3/4" and 1" fittings.
Laser Tools Deep Impact Socket Set 3/4 inch D 9pc
Deep 3/4" square drive impact socket set, single-hex (6pt) profile. The nine piece set covers a range of larger sizes from 30mm to 46mm designed for commercial vehicle maintenance and servicing. The generous 90mm socket depth is particularly useful when access is limited. Supplied in a robust dual-latch carry case for portable, organised tool storage.
Laser Tools Electric Drum Pump for AdBlue AC/DC
Electric pump for AdBlue®, designed to fit 205L (45 gallon) drums and IBC tanks, where the access hole is bigger than 55mm diameter. UK plug/charger.
Laser Tools Extra Deep Impact Socket Set 3/4 inch D 7pc
Extra deep 3/4" square drive impact socket set, single-hex (6pt) profile tool storage. The seven piece set covers a range of larger sizes from 24mm to 36mm designed for commercial vehicle maintenance and servicing. The generous 120mm socket depth is particularly useful when access is limited. Supplied in a robust carry case for portable, organised tool storage.
This high pressure grease gun works at 8000psi and has an improved plunger for complete grease removal for both cartridge and bulk grease loading. Takes 400cc cartridge.
Laser Tools Jumbo Combination Spanner Set 6pc
Heavy duty combination spanner set, with 6 sizes from 34mm up to 50mm.
Laser Tools Lever Action Pump - AdBlue
Lever action pump specifically for use with AdBlue®. Fits 200L drums or barrels, or 1000L IBC tank.
Laser Tools Lever Pump Thread Adaptors 2pc
Designed for use with Laser lever action pumps, allowing them to be attached to 205L (45 gallon) drums, including Mauser or Tri-sure type threads.
Laser Tools Ratchet Crimping Tool - for Supaseal Connectors
Ratchet crimping tool for Supaseal connectors.
Laser Tools Wheel Stud Cleaning Tool Set
Product of the week! Wheel stud cleaning tool set offers a quick and easy solution for cleaning dirt, corrosion and grease from wheel studs before refitting the wheels and wheel nuts.
A manually operated vacuum fluid extractor with a 10 litre capacity. It is suitable for extracting all types of lubricating oils used in cars, motorcycles, marine engines and stationary engines. It is also suitable for non-corrosive low viscosity fluids such as water and has numerous additional applications such as draining cisterns, fish tanks, sinks, etc
Manual/Pneumatic Fluid Extractor 10L
A pneumatic or manually operated vacuum fluid extractor with a 10-litre capacity, which can be connected to a workshop compressed air supply via a standard 1/4" Euro adaptor. It is suitable for extracting all types of lubricating oils used in cars, motorcycles, marine engines and stationary engines. It is also suitable for non-corrosive low viscosity fluids such as water, and has numerous additional applications including draining cisterns, fish tanks and sinks etc.
Large 16 litre oil drain pan with anti-splash lip and enclosed spout designed to fit the mouth of standard oil cans for easy, spill-free emptying. The large capture area, 400mm wide, is useful for plant and farm machinery with bigger oil capacities. Heavy duty construction ideal for oil and antifreeze with large carrying handles for ease of use.
Oil Filter Pliers 95mm to 178mm
Adjustable oil filter pliers for removing spin-on type oil filters on HGV's from 95mm to 178mm diameter. Multi-position clamp head for fast adjustment and serrated jaws for a strong grip even on oily surfaces. The handles are plastic dipped for a non-slip comfort grip and the long length provides extra leverage, ideal for removing stubborn filters. Manufactured from black treated steel for durability and strength.
This extractor is designed to vacuum fluids from inaccessible or confined areas. It is ideal for oil changes on boats, cars, motorcycles, outdoor power equipment and industrial machinery etc, allowing for the oil to be cleanly extracted though oil filler or dipstick holes when it is not possible or practical to use the drain/sump plug.
#N/A
Quick Fit Radiator Adaptor for Volvo
Quick fit radiator adaptor for filling or purging radiators on Volvo trucks.
The SensorCheck is a handheld EBS / ABS sensor and exciter ring tester, for use on trucks, trailers, and buses. Designed with ease of use in mind, the SensorCheck takes minutes to set-up and once connected, undertakes a complete test cycle of the six most common causes of EBS / ABS faults at the touch of a button, in just 15 seconds.
Side lever barrel pump suitable for pumping various (non corrosive) liquids such as oil, diesel and anti freeze from standard 205 litre barrels.
The Bowmonk TrailerCheck replicates the role of a truck, providing power to a trailer’s electrical systems, making it an ideal choice when no tractor unit is available. Once connected and switched on, using the toggle switches, the TrailerCheck unit can turn each trailer light on or off as required. Circuits tested include the indicators, side and number plate lights, side repeater lights, fog, reverse and brake lights. Portable 24V powerbox Tests trailer’s lighting system Tests trailer’s EBS / ABS warning light Tests trailer’s CAN activity Single operator auto test mode
Truck Cabin Shock Absorber Spring Compressor
Many modern heavy goods vehicles and trucks have driver’s cabins that have shock absorbers fitted between the cabin and the chassis. Just like any shock absorber and coil spring combination, these units will wear over time. Given the dimensional size and strength of the spring used, a suitable spring compressor is required to allow the spring to be compressed so that the shock absorber can be replaced. The 7461 has been introduced specifically to safely compress and hold the coil spring prior to the removal of the shock absorber.
TST22 13-Pin Towing Socket Tester 12V
DVSA Approved towing socket tester for use in MOT testing stations on vehicle classes 4, 5 and 7. Quick and simple test of 12V 13-pin Euro-type sockets fitted to the rear of the vehicle.
Universal Stud and Hub Cleaning Kit 7pc
A universal stud and hub cleaning tool kit suitable for use on wheel studs up to 28mm in diameter, to remove corrosion and dirt in preparation of refitting the wheels to the vehicle. It features a 1/2" square drive, enabling it to be fitted to the same impact wrench/air gun that was used to remove the wheel nuts (only requires light contact pressure for best results). Suitable for use on larger cars, 4x4s, vans and HGV.
Wheel Dolly for HGV and Large 4x4 Vehicles
The ideal solution for moving large heavy wheel and tyre assemblies around the workshop or manoeuvring them off and on to vehicle axles, the Laser 8608 allows one person to safely move wheels up to 150kg.
Wheel Stud Thread Restorer for HGV
Wheel stud rethreader designed to correctly align and restore damaged HGV wheel stud and bolt threads, leaving the undamaged and restored threads perfectly aligned.