Laser Tools Wireless 12V Towing Circuit Tester 9181

A diagnostic kit that allows the user to check and test the vehicle tow socket functionality while sitting in the vehicle. The wireless design makes it perfect for one-person operation, allowing for quick and efficient checks without assistance.

Laser Tools Deep Impact Socket Set 3/4 inch D 29pc 9224

A 29-piece set of deep impact quality 3/4" drive single hex (6pt) sockets in sizes ranging from 19mm to 65mm. Manufactured from chrome molybdenum, designed to withstand the stresses of impact tool use. They also feature a practical black phosphate finish, offering improved corrosion resistance, together with a drilled collar to accept retaining pin or detent ball.

Laser Tools Manual Fluid Extractor 10L

A manually operated vacuum fluid extractor with a 10 litre capacity. It is suitable for extracting all types of lubricating oils used in cars, motorcycles, marine engines and stationary engines. It is also suitable for non-corrosive low viscosity fluids such as water and has numerous additional applications such as draining cisterns, fish tanks, sinks, etc

Laser Tools Easy Flow Pump 20L Drums

An easy-flow pump for use with 20L oil drums and suitable for use with engine oil, gear oil, and transmission fluid (ATF). It features a D-shaped handle, for easy down stroke, 50” PVS hose with an internal wire spring to help reduce kinking, and a curved aluminium spout.

Laser Tools Manual/Pneumatic Fluid Extractor 10L

A pneumatic or manually operated vacuum fluid extractor with a 10-litre capacity, which can be connected to a workshop compressed air supply via a standard 1/4" Euro adaptor. It is suitable for extracting all types of lubricating oils used in cars, motorcycles, marine engines and stationary engines. It is also suitable for non-corrosive low viscosity fluids such as water, and has numerous additional applications including draining cisterns, fish tanks and sinks etc.

Laser Tools Truck Cabin Shock Absorber Spring Compressor

Many modern heavy goods vehicles and trucks have driver’s cabins that have shock absorbers fitted between the cabin and the chassis. Just like any shock absorber and coil spring combination, these units will wear over time. Given the dimensional size and strength of the spring used, a suitable spring compressor is required to allow the spring to be compressed so that the shock absorber can be replaced. The 7461 has been introduced specifically to safely compress and hold the coil spring prior to the removal of the shock absorber.

Laser Tools Universal Stud and Hub Cleaning Kit 7pc

A universal stud and hub cleaning tool kit suitable for use on wheel studs up to 28mm in diameter, to remove corrosion and dirt in preparation of refitting the wheels to the vehicle. It features a 1/2" square drive, enabling it to be fitted to the same impact wrench/air gun that was used to remove the wheel nuts (only requires light contact pressure for best results). Suitable for use on larger cars, 4x4s, vans and HGV.

Laser Tools HGV Wheel Nut Cap Remover Pliers

Heavy duty wheel nut cap remover pliers. Adjustable to 2 sizes for HGV wheel nut (lug nut) covers.

Laser Tools Wheel Dolly for HGV and Large 4x4 Vehicles

The ideal solution for moving large heavy wheel and tyre assemblies around the workshop or manoeuvring them off and on to vehicle axles, the Laser 8608 allows one person to safely move wheels up to 150kg.

Laser Tools Wheel Stud Thread Restorer for HGV

Wheel stud rethreader designed to correctly align and restore damaged HGV wheel stud and bolt threads, leaving the undamaged and restored threads perfectly aligned.

Laser Tools Air Brake Adjusting Kit for HGV 2pc

Used to adjust the automatic slack adjusters found on many HGV brake systems. The kit contains a fork shaped tool to release the brake tensioner button while the double square reversible ratchet ring spanner is used to adjust the brake adjuster clearance.

Laser Tools Filling Funnel for AdBlue

Designed to screw directly on to the AdBlue® tank filler neck where the tank is fitted with a vertically accessed filler (e.g. under boot floors or under-bonnet areas etc.). The funnel valve allows the user to stop the filling process even when there is fluid still in the funnel to help avoid over filling the tank.

Laser Tools Oil Filter Pliers 95mm to 178mm

Adjustable oil filter pliers for removing spin-on type oil filters on HGV's from 95mm to 178mm diameter. Multi-position clamp head for fast adjustment and serrated jaws for a strong grip even on oily surfaces. The handles are plastic dipped for a non-slip comfort grip and the long length provides extra leverage, ideal for removing stubborn filters. Manufactured from black treated steel for durability and strength.

Laser Tools HGV Exhaust Brake Adjustment Gauges for Volvo and Mack

A 14-piece HGV exhaust brake adjustment gauge, also known as "Jake Brake" gauges, used to adjust the engine braking system cam clearance as required by OEM.

Laser Tools Cooling System Pressure Tester for HGV

High quality cooling system pressure tester with a comprehensive set of adaptor caps for HGVs.

Laser Tools DPF Removal/Installation Tool for Scania

Designed to allow the easy removal and fitment of the DPF (Diesel Particulate Filter) found on SCANIA 5 and 6 Cylinder Engines.

Laser Tools Side Lever Barrel Pump

Side lever barrel pump suitable for pumping various (non corrosive) liquids such as oil, diesel and anti freeze from standard 205 litre barrels.

Laser Tools Oil Drain Pan 16L

Large 16 litre oil drain pan with anti-splash lip and enclosed spout designed to fit the mouth of standard oil cans for easy, spill-free emptying. The large capture area, 400mm wide, is useful for plant and farm machinery with bigger oil capacities. Heavy duty construction ideal for oil and antifreeze with large carrying handles for ease of use.

Laser Tools Oil/Fluid Extractor

This extractor is designed to vacuum fluids from inaccessible or confined areas. It is ideal for oil changes on boats, cars, motorcycles, outdoor power equipment and industrial machinery etc, allowing for the oil to be cleanly extracted though oil filler or dipstick holes when it is not possible or practical to use the drain/sump plug.

Laser Tools Insulated Extra Long Slim Star Bit Socket 3/8inch D T10 to T40 7pc

A 7-piece set of fully insulated slimline long reach, 3/8” drive, Star* socket bits, suitable for use on restricted access TORX* fixings as found on EV batteries etc. Manufactured to IEC60900 standards, for safe operator use on live circuits up to 1000v AC and 1500v DC, making them ideal for use by electricians, auto electricians or mechanics working on hybrid and electric vehicles or areas where access is restricted. The extra slim overall shaft diameter allows for access between close fitting components where standard electricians long series bit sockets cannot reach.

Laser Tools Insulated Plier Set 3pc

A set of 3 insulated pliers manufactured to IEC60900 standards, for safe operator use on live circuits up to 1000v AC and 1500v DC, from chrome vanadium with a satin finish and insulated handles with slip guards. Suitable for use by technicians and mechanics working on hybrid and electric vehicles, together with professional electricians and installers. Supplied in an EVA foam tray, designed to fit roll cab drawers, keeping the pliers clean, tidy and ready for use.

Laser Tools HGV Brake Caliper Wrench 22mm

3/4"D brake caliper wrench designed for loosening and tightening brake caliper screws.

Laser Tools HGV Brake Caliper Wrench 24mm

3/4"D brake caliper wrench designed for loosening and tightening brake caliper screws.

Laser Tools HGV Brake Caliper Wrench 26mm

3/4"D brake caliper wrench designed for loosening and tightening brake caliper screws.

Laser Tools HGV Brake Caliper Wrench E24

3/4"D brake caliper wrench for releasing and refitting brake caliper mounting bolts on commercial vehicles. These caliper mounting bolts are tightened to very high torque figures, this slogging wrench, designed with a 3/4" drive and two impact striking faces, is designed to get the bolts loose.

Laser Tools HGV Trailer Connector Removal Kit

A HGV trailer connector removal tool kit designed for the quick release of the electronic connectors on Knorr-Bremse EBS modules without causing any damage. It comprises 3 tools for easing apart 2, 4, 6 and 12 pole electrical connectors on the trailer module, together with a tool for loosening the bayonet nut on the power supply connection.

Laser Tools Impact Hub Nut Socket Set 1/2inch D 10pc

An impact socket set in 1/2" square drive, Bi-Hex (12pt) profile. This ten piece box set covers a range of commonly used larger sizes, from 32mm to 36mm, in 2 different depths, and ideal for use on hub nuts. Manufactured from chrome molybdenum, designed to withstand the stresses of impact tool use. They also feature a practical black phosphate finish, offering improved corrosion resistance, together with a drilled collar to accept retaining pin or detent ball.

Laser Tools Impact Socket Set 1/2inch D 18pc

A high quality, 1/2" square drive impact socket set with eighteen metric sockets from 10mm to 32mm in single hex (6pt) profile. A great workhorse set designed to withstand the rigors of impact tool use. This heavy duty socket set is manufactured from chrome vanadium for strength and durability with a black phosphate finish for improved corrosion resistance. Includes a wide range of sizes covering the majority of repair and maintenance jobs in the workshop.

Laser Tools Lock Nut Socket 80

A hub locknut socket for rear axles on Mercedes-Benz Atego, Vario 814 and some MAN vehicles; 3/4" drive.

Laser Tools Oil Filter Chain Wrench

Strong, double width chain wrench with handle designed for heavy duty applications, including HGV use. The double-link chain construction provides plenty of strength and grip, even on oily surfaces and long length will fit a wide range of canister-type filters from 60 – 160mm diameter. The handle is 350mm long, perfect for extra leverage when removing stubborn filters and the cranked swivel design is useful when access is restricted. All-in-one wrench and handle design, unlike traditional chain wrenches there is no need for a separate ratchet or power bar, a really useful tool for the HGV workshop.

Laser Tools Power Bar 3/4inch D 1000mm

A 3/4"D heavy-duty power bar for extra leverage on tight nuts.

Laser Tools Power Bar 3/4inch D 600mm

A 3/4"D heavy duty power bar for extra leverage on tight nuts.

Laser Tools Ratchet Ring Combination Spanner Set 12pc

Ratchet ring combination spanner set 8mm to 19mm, with Bi-Hex (12pt) ratchet ring. The 72-tooth ratchet mechanism means that just 5° of movement is required, allowing fasteners to be turned quicker and making them ideal for use in confined areas. They are manufactured from tough durable chrome vanadium with a chrome plated finish and are supplied in a storage case that can be hung on the workshop wall or laid flat in a toolbox drawer.

Laser Tools Rear Axle Nut Socket 3/4inch D

Rear axle nut socket for Mercedes-Benz trucks 92mm x 6 point, 3/4" drive.

Laser Tools Torque Multiplier 1inch D

Designed for removing the highly torqued wheel nuts on light commercials and trucks, up to a maximum of 3200Nm (2360lb-ft).

Laser Tools Torque Wrench 1inch D 480-1500Nm

A heavy-duty 1"D click type torque wrench, 1827mm in length, with a range of 480 to 1500Nm (354.2 - 1107lb-ft), suitable for a wide variety of automotive and engineering applications. It features an easy to read scale, which is adjustable in 6Nm increments, together with a large diameter knurled grip handle and a spring-loaded locking collar.

Laser Tools Combination Spanner Set 6

A comprehensive set of 25 Bi-Hex (12pt) combination spanners in a fully polished finish. This professional set includes a good range of spanners covering the most common servicing and maintenance tasks in the workshop. Supplied in a tough tool roll with hanging eyelets for convenient display and storage. The tapered roll has mesh pockets clearly printed with spanner sizes so tools are stored in the correct order making it easy to find the right one when needed.

Laser Tools Deep Impact Socket Set 1/2inch D 9pc

A set of deep, 1/2" square drive impact sockets in single hex (6pt) profile. Ideal for car engine maintenance and anywhere that regular sockets are too short for access. The set covers a medium range of sizes between 10mm and 24mm. Designed to withstand the stresses of impact tool use, making it a great set for the fast, safe removal of single hex (6pt) fixings.

Laser Tools Extending Heavy Duty Ratchet 3/4inch D

Heavy duty 3/4"D ratchet with extending shaft up to 1000mm, and knurled grip handle.

Laser Tools Extra Long Flexi-Head Ratchet 1/2inch D

Fully polished, flexi-head extra long 430mm handle for greater access and flexibility.

Laser Tools Extra Long Flexi-Head Ratchet 3/8inch D

Fully polished, flexi-head extra long 300mm handle for greater access and flexibility.

Laser Tools Extra Long Ratchet 1/2inch D

Fully polished extra long 630mm ratchet with soft grip handle, providing greater access.

Laser Tools HGV Brake Caliper Wrench 21mm

3/4"D brake caliper wrench for releasing and refitting brake caliper mounting bolts on commercial vehicles. These caliper mounting bolts are tightened to very high torque figures, this slogging wrench, designed with a 3/4" drive and two impact striking faces, is designed to get the bolts loose.

Laser Tools Breakback Torque Wrench 1inch D 300-1000Nm

A comprehensive set of 25 Bi-Hex (12pt) combination spanners in a fully polished finish. This professional set includes a good range of spanners covering the most common servicing and maintenance tasks in the workshop. Supplied in a tough tool roll with hanging eyelets for convenient display and storage. The tapered roll has mesh pockets clearly printed with spanner sizes so tools are stored in the correct order making it easy to find the right one when needed.

Laser Tools Insulated Screwdriver Set 7pc

Fully insulated, VDE screwdriver set in Phillips and Flat profiles, with black tips, to IEC60900 standard for live working.

Laser Tools Insulated Tool Kit 3/8inch D 22pc

Fully insulated tool set, for live working up to 1000V AC or 1500V DC, ideal for hybrid and EV servicing and maintenance. Includes the most commonly used tools: 3/8"D ratchet, 15 x hex sockets, extension bars, pliers and screwdrivers.

Laser Tools Insulation Resistance Multimeter CAT III

Designed to check insulation on electrical wiring systems, appliances and machinery, and suitable for use on hybrid and electric vehicles. Insulation testers for use in vehicle workshops need to be both physically robust because of the environment in which they are used and to provide accurate diagnostic information.

Laser Tools AC/DC Digital Clamp Metre CAT III 1000A

Digital Clamp Meter suitable for use on all 12V system vehicles, as well as modern Hybrid and EV's.

Laser Tools Insulated Star Screwdriver Set 7pc

Fully insulated, VDE screwdriver set in Star* profile, with black tips, to IEC60900 standard for live working.

Laser Tools Insulated Open Ended Spanner Set 7pc

Insulated open ended spanner set, for hybrid and electric vehicle servicing and maintenance, in a range of useful sizes from 8mm to 19mm, for live working up to 1000V AC/ 1500V DC. 

Laser Tools EV Tools and Equipment Package

A comprehensive and professional set of insulated tools and test instruments to safely complete high voltage service and repair work.

Laser Tools High Voltage Tester CAT IV 1000V

A high voltage, CAT IV 1000V, tester for checking the high voltage systems found on electric and hybrid vehicles.

Laser Tools Insulated Slipper Torque Wrench 3/8inch D 5 - 25Nm

A fully insulated torque wrench manufactured to IEC60900:2018 standards for 1000vAC / 1500vDC live working. Ideal for use on hybrid and electric vehicles. This torque wrench uses a 'slipper' type release mechanism instead of a traditional click mechanism.

Laser Tools Extra Long Insulated Hex Key Set 6pc

Insulated, single ended Hex keys 2.5mm to 8mm, with VDE certified protection to IEC60900 standard for live working up to 1000V AC/1500V DC.

Laser Tools Insulated Safety Clamp 1000V

An insulated plastic safety clamp, manufactured to DIN VDE 0680-1 standards, designed to secure transparent insulating shrouding in place to prevent accidental contact with live terminals. Ideal for use by electricians, auto electricians or mechanics working on hybrid and electric vehicles.

Laser Tools Hybrid Tools Safety Pack

Stay safe while carrying out work on hybrid and electric cars with safety packs from Laser.

Laser Tools Hybrid/EV Test and Repair Tools Kit - Add-on Upgrade

A kit of additional hybrid/EV tools, specifically selected to enhance the Hybrid Tools Safety Pack  and ensure the technician is fully equipped for all outcomes.

Laser Tools Extra Deep Wheel Nut Socket 3/4 inch D 32mm

400mm extra long wheel nut socket allows greater access on HGV & light commercial vehicles.   32mm, Single hex (6pt) Manufactured from Chrome Molybdenum with black phosphate finish. Part of a wider range of extra long wheel nut sockets. Sizes available: 24, 27, 30, 32, 33 & 36mm In 6 popular sizes 24mm - 36mm

Laser Tools Lever Action Pump - AdBlue

Lever action pump specifically for use with AdBlue®. Fits 200L drums or barrels, or 1000L IBC tank.

Laser Tools Electric Drum Pump for AdBlue AC/DC

Electric pump for AdBlue®, designed to fit 205L (45 gallon) drums and IBC tanks, where the access hole is bigger than 55mm diameter. UK plug/charger. 

Laser Tools Grease Gun 500cc

This high pressure grease gun works at 8000psi and has an improved plunger for complete grease removal for both cartridge and bulk grease loading. Takes 400cc cartridge.

Laser Tools Barrel Pump - Rotary

This robust tool pumps oil and diesel using 3/4" and 1" fittings.

Laser Tools Wheel Stud Cleaning Tool Set

Product of the week! Wheel stud cleaning tool set offers a quick and easy solution for cleaning dirt, corrosion and grease from wheel studs before refitting the wheels and wheel nuts.

Laser Tools Ratchet Crimping Tool - for Supaseal Connectors

Ratchet crimping tool for Supaseal connectors.   

Laser Tools Air Duster Blow Gun - for HGV

Air duster blow gun supplied with hose swivel coupler and T-connector. Designed for use in HGV cabs.

Laser Tools Jumbo Combination Spanner Set 6pc

Heavy duty combination spanner set, with 6 sizes from 34mm up to 50mm.

Laser Tools Extra Deep Impact Socket Set 3/4 inch D 7pc

Extra deep 3/4" square drive impact socket set, single-hex (6pt) profile tool storage. The seven piece set covers a range of larger sizes from 24mm to 36mm designed for commercial vehicle maintenance and servicing. The generous 120mm socket depth is particularly useful when access is limited. Supplied in a robust carry case for portable, organised tool storage.

Laser Tools Deep Impact Socket Set 3/4 inch D 9pc

Deep 3/4" square drive impact socket set, single-hex (6pt) profile. The nine piece set covers a range of larger sizes from 30mm to 46mm designed for commercial vehicle maintenance and servicing. The generous 90mm socket depth is particularly useful when access is limited. Supplied in a robust dual-latch carry case for portable, organised tool storage.

Laser Tools Extra Deep Wheel Nut Socket 3/4 inch D 33mm

400mm extra long wheel nut socket allows greater access on HGV & light commercial vehicles. 33mm, Single hex (6pt) Manufactured from Chrome Molybdenum with black phosphate finish. Part of a wider range of extra long wheel nut sockets. Sizes available: 24, 27, 30, 32, 33 & 36mm Range of 6 popular sizes 24mm - 36mm